| 1. Origin | China | ||||||
| 2. Tariff No. | 7202 8000 | ||||||
| 3. Quality | W C S Mn As Sn P Si Cu Sb |
75.00 0.40 0.08 0.50 0.10 0.08 0.05 0.70 0.15 0.05 |
% min. % max. % max. % max. % max. % max. % max. % max. % max. % max. |
||||
| 4. Form | Lumps in range 10 x 100mm, 90% min. | ||||||
| 5. Packaging | In iron / steel drums, of uniform net weight per lot, normally 100 KG net. | ||||||
| 6. Lot Size & Tolerance | 10 MT (+/- 2%) | ||||||
| 7. Documentation | Standard documentation, as per MMTA Consolidated Regulations, plus Chinese quality certificate identifying drums to certificate (copy acceptable). | ||||||
| 8. Weighing & Sampling | As per MMTA Consolidated Regulations. | ||||||
| 9. Other Notes | All other elements should be each 0.10% max, with the exception of Iron. Unless contracted at the time of negotiation, other elements above do not give Buyer right to reject and may only form the basis for further discussion in the event material assays outside of these maximum levels. Members are recommended to have material 40% minimum sampled and assayed upon first arrival of material into warehouse by an MMTA approved sampler/assayer and pass on the findings upon onward release. In such event a global independent certificate shall be accepted as long as the sampled lot size does not exceed 20 MT |
||||||