| 1. Origin | Kluchevsky Ferro Alloy Plant, Russia | ||||||
| 2. Tariff No. | 8112 2100 | ||||||
| sssCr 99.00% min. (total base) If specific grades are contracted, the following typicals shall apply: |
|||||||
| 3. Quality | Cr Fe Al Si C S Pb Cu P Zn Sb Sn Bi As Co N |
X98.5 98.5 0.6 0.7 0.4 0.03 0.02 0.001 0.02 0.02 0.01 0.008 0.004 0.0005 0.01 not stated not stated |
X99 99.0 0.5 0.5 0.5 0.03 0.02 0.001 0.02 0.02 0.01 0.008 0.004 0.0005 0.01 not stated not stated |
X99H4 99.0 0.5 0.2 0.2 0.03 0.02 0.0008 0.01 0.02 0.006 0.008 0.004 0.0005 0.01 0.005 0.04 |
X99H1 99.0 0.5 0.5 0.2 0.01 0.02 0.0005 0.005 0.005 0.005 0.002 0.004 0.0004 0.01 not stated 0.01 |
min %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. max %. |
|
| Unless contracted at the time of negotiation, above does not give Buyer right to reject and may only form the basis for further discussion in the event material assays outside of these maxes. | |||||||
| 4. Form | Lumps, in range 5 - 80mm, 80% min (X98.5) 5 - 50mm, 80% min (X99, X99H4, X99H1) with < 5mm, 10% max. and > 80mm, 10% max. Not more than 10 KG each. | ||||||
| 5. Packaging | In steel drums, uniform net weights per lot, each usually 300 KG | ||||||
| 6. Lot Size & Tolerance | 10 MT (+/- 2%) | ||||||
| 7. Documentation | Standard documentation, as per MMTA Consolidated Regulations. | ||||||
| 8. Weighing & Sampling | As per MMTA Consolidated Regulations. | ||||||
| 9. Other Notes | Specific grades given are based on Russian Government Assay GOST 5905-2004 | ||||||